Serum 1000
Serum 1000 is a surface and substrate
cleaner for removal of organic
contamination. It accomplishes this by the
use of 20% hydrogen peroxide formulated with
surface active agents. This formulation
allows Serum 1000 to break surface tension
to penetrate deep into the substrate of
porous materials. The Serum 1000 reacts
with organic matter to generate profuse foam
boiling the contamination to the surface for
removal via HEPA vacuuming. Serum 1000 also
reacts with the organic contamination on the
surface generating profuse foam, breaking
everything loose from the surface and up
into the foam for removal via HEPA
vacuuming. Serum 1000 may be applied to any
surface not harmed by water. Serum 1000
doesn't leave behind any toxic or hazardous
chemicals. Serum 1000 degrades to water and
oxygen. There is nothing left behind to gas
off after drying. NO VOC's.
Click here for a Video of the Serum 1000 at work.
Serum 1000 Accelerator
Serum 1000 Accelerator is a designed additive to cause Serum 1000 to
perform at a higher level than the Serum 1000 by itself. Serum 1000 for
years has performed flawlessly at cleaning all organics and bleaching
some of the organic stains that mold leaves behind. The Accelerator is
designed to cause Serum 1000 to create billions of hydroxyl radicals to
super charge it's bleaching qualities. Now with the Accelerator, you can
clean the organics faster because of it's super excited state and be
assured that all the staining will be bleached away improving the
esthetics of all surfaces being cleaned. The Accelerator is packaged as
15 ounces in a quart bottle, which is what is required to accelerate
five (5) gallons of Serum 1000. If less accelerated product is desired,
you may measure and add three (3) ounces of Accelerator per each gallon
of Serum 1000 that you would like to treat and accelerate.
Shelf life of Accelerated Serum 1000 is approximately one and one half
to two days. (1.5-2 days). Any run off from spraying accelerated Serum
1000 that may occur is pH 9. The only by product of the accelerated
Serum 1000 is water, oxygen and potassium acetate (a food additive).
Serum 2000
Serum 2000 is a BIO DISPERSANT
formulated with siloxane. Siloxane
chemically attaches to any surface
to give the longevity and durability
required for long term survival.
The polymers that reside on the
siloxane backbone are charged to
repel organic molecules. Serum 2000
can be applied to any interior
surface not harmed by water, dries
clear, remains flexible, remains
breathable and is non-intrusive to
the applied surface. It may be
applied to all the materials of
construction as well as cloth
upholstery, carpet and pad, as well
as many other materials that need to
be protected against organic
contamination.
New structures are often exposed to large amounts of organic contamination. Serum 2000 can be applied materials of construction to protect against organic matter contamination. A blue tint may be added to the process for verification.
Serum CU
SERUM CU is a formulated 20% Hydrogen Peroxide
solution containing surface active agents that enhance
wetting. Enhanced wetting breaks surface tension to penetrate deep into the fiber's substrate. SERUM
CU is uniquely formulated to attack and remove organic stains and odors. As SERUM CU evaporates
from the carpet or fabric the only thing left behind is water and oxygen, eaving a fresh clean scent.
Serum SR
Serum SR is formulated to remove heavy smoke
build up in fire damaged structures. It's chemistry lends
itself to be very agressive but yet safe to use. It is based on
the tried and true use of a small amount of caustic and a water
soluble solvent from the alcohol family to dissolve, sequester
and rinse heavy heated on smoke that may exist in fire damaged
structures. Simply spray Serum SR onto all affected areas,
allow a few (10) minutes dwell time then rinse off using a small
volume high pressure washer. Once all the visible smoke has
been removed, simply spray all areas with Serum 1000. Serum
1000 will go after and oxidize the carbon that causes smoke
smell in a burned structure. There will be no more smoke odor
after using Serum 1000.
Serum TW
Serum TW is designed to be used through a high pressure
washer either hot or cold. It is designed to remove the dreaded
magnetic road film without brushing. Serum TW contains an
acrylic polymer that places a microscopic coating on all
surfaces of vehicles. Serum TW dries spot free and puts a shine
on even the dullest paint surface. On glass, it causes water to
bead and blow off very rapidly so that windshield remains clear
and windshield wippers shouldn't be required.
Serum TG
Serum TG is designed to clean and brighten grout and
ceramic tile. Simply spray SERUM TG over the area to be cleaned.
Allow a few minutes dwell time and using a stiff bristle brush,
agitate the grout areas you are attempting to clean. Rinse with
clean clear water. Repeat in areas if required.
Serum SBC
Serum SBC is intended to be used as a Spray & Wipe product to clean surfaces of mold
& mildew "BLOOM". The mold and mildew that form on the surfaces is referred to as
"Mold Bloom". This "Bloom" is the result of temperature and moisture levels high
enough to allow surface mold and mildew to grow while the structure is closed for
long periods. Serum SBC is also vey effective at cleaning CAT 1 and CAT 2 water
loses. Serum SBC is a cleaner/remover that completes the job of cleaning surfaces
after a water loss. Serum SBC will remove all the dust, dirt and organic
contamination as well as kill the odor associated with mold and mildew growth. It
will also tend to bleach any stains that the mold and mildew leave behind. Serum
SBC will enhance surface colors and brighten dull surfaces. After using Serum SBC,
the space will smell fresh and clean.
|